M.2 NGFF SATA Enclosure | USB 3.1 (10Gbps) Actual product may vary from photos User Manual SKU#: SM21BMU31C3 For the latest information and specifications visit www.startech.
Compliance Statements FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Statements Safety Measures • Wiring terminations should not be made with the product and/or electric lines under power. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • Les terminaisons de câblâge ne doivent pas être effectuées lorsque le produit et/ou les câbles électriques sont sous tension.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................2 Product Diagram.....................................................................................4 Front View..................................................................................................................................................... 4 Internal View...................
Product Diagram Front View 1 2 1 Drive Tray Screw 2 USB 3.1 Micro-B Port 3 Drive Tray Screw 3 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Internal View 1 1 2 3 M.2 NGFF Key B Drive Connector 2 Drive Length Adjustable Holes (x 4) 3 Drive-Mount Hardware (Screw and Standoff) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents • • • • • • M.2 NGFF SATA Enclosure - USB 3.1 x 1 USB C to Micro B Cable x 1 Assembly Screws x 4 Set of M.2 Drive-Mount Hardware x 1 Screwdriver x 1 User Manual x 1 Requirements System requirements are subject to change. For the latest requirements, please visit www.startech.com/SM21BMU31C3. • An available USB connector • An M.2 NGFF SATA Solid State Drive (SSD) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installing a Hard Drive Warning! Hard Drives should be handled carefully, especially when they’re transported. If you’re not careful with your drives, you may lose data as a result. Make sure that you are properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large grounded metal surface for several seconds to discharge any built-up static electricity. 1.
8. Slide the Drive Tray back into the Hard Drive Enclosure so that the USB 3.1 Micro-B Connector is facing outward. 9. Place the Faceplate over the Connector. 10. Secure the Faceplate in place by inserting two Drive Tray Screws on either side of the USB 3.1 Micro-B Port on the front of the Hard Drive Enclosure and use the Screwdriver to tighten the Drive Tray Screws.
Formatting a Hard Drive If you install a Hard Drive that already has data on it, after you insert the Hard Drive, it appears under My Computer or Computer with a drive letter assigned to it. If you install a brand-new Hard Drive that doesn’t contain any data, you must format the Hard Drive. If you use a computer that is running a version of Windows®, complete the following: 1. On the taskbar, click the Windows icon. 2. In the Search field, type Disk Management. 3.
8. When the drive is successfully installed, it appears under My Computer or Computer with a drive letter assigned to it. Disconnecting a Hard Drive If the computer that you are using is running a version of Windows, complete the following steps: 1. On the task bar notification area on your desktop, click the Safely remove Hardware and Eject Media icon. 2. Click the storage device that you want to remove. 3.
Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
