User Manual

ManualsBrandsStartech ManualsHardwareStarTech.com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser, HDD/SSD Cloner & Wiper for M.2 PCIe AHCI/NVMe, M.2 SATA, 2.5/3.5" SATA Drives, External Hard Drive Eraser/Duplicator, TAA Drive Sanitizer/Copier - solid state / hard drive duplicator/erase

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 26, 2021 10:15 AM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram (SM2DUPE11)

Front View

Top Edge View

Component Function

1 LCD Display • Displays Menu options, status, and details

2 2.5”/3.5” SATA Drive Connector • Connect a source 2.5”/3.5” SATA Drive

3 M.2 Drive Connector • Connect a source M.2 SATA or NVMe Drive

4 M.2 Drive Connector • Connect a target M.2 SATA or NVMe Drive

Drive-Tray Screw /Drive -Tray

Screw Hole

• Secures the Drive Tray

6 Rubber Drive Holder • Secures the M.2 SATA or NVMe Drive

7 2.5”/3.5” SATA Drive Connector • Connect a target 2.5”/3.5” SATA Drive

8 LED Indicators • Indicates Drive Status

9 LCD Display Buttons • Navigate through the LCD Display

10 Power Switch • Toggle ON (I) or OFF (O)

11 Power Connector • Connect the Universal Power Adapter

1 to 1 NVMe/SATA Drive Duplicator and Secure Eraser

Package Contents

• Duplicator Dock x 1

• SATA Drive Extensions Cable x 2

• Anti-Slip/Vibration Pads x 2

• Universal Power Adapter x 1

• Regional Power Cords (NA, JP, EU, UK, ANZ) x 5

• Quick-Start Guide x 1

Product Information

For product information, technical specications, manuals, and Declarations of

Conformance please visit:

www.startech.com/SM2DUPE11

Product Requirements

• M2 SATA/NVMe SSD x 2

• 2.5”/3.5” SATA Drive x 2

Installation

Power the Drive Duplicator and Secure Eraser

1. Connect the Universal Power Adapter to the appropriate Regional Power Cord.

2. Connect the Universal Power Adapter to the Power Connector on the Drive

Duplicator and Secure Eraser.

3. Connect the Regional Power Cord to a Power Source.

4. Toggle the Power Switch to the ON (I) position.

Connect a 2.5”/3.5” SATA Drive

Note: Do not connect drives directly into the Hard Drive Duplicator and Secure

Eraser, as it puts undue strain on the device connectors.

1. Connect the Drive Connector Cable(s) to 2.5”/3.5” SATA Drive(s) and to the

2.5”/3.5” SATA Drive Connector(s) on the Drive Duplicator and Secure Eraser.

2. Place the Drive Duplicator and Secure Eraser on the Anti-Slip/Vibration Pads

(included).

Note: Avoid placing drives directly on a metal surface.

Connect M.2 SATA or NVMe Drive

1. Determine the size of the M2. SATA or NVMe Drive(s).

*Product may vary from photos

Summary of content (2 pages)

PAGE 1
Quick-Start Guide 1 to 1 NVMe/SATA Drive Duplicator and Secure Eraser Product Diagram (SM2DUPE11) Front View Package Contents 1 2 9 3 8 7 4 5 6 Top Edge View *Product may vary from photos • Duplicator Dock x 1 • SATA Drive Extensions Cable x 2 • Anti-Slip/Vibration Pads x 2 • Universal Power Adapter x 1 • Regional Power Cords (NA, JP, EU, UK, ANZ) x 5 • Quick-Start Guide x 1 Product Information For product information, technical specifications, manuals, and Declarations of Conformance please visit:
PAGE 2
. Remove the Drive-Tray Screw, using a Phillips Head Screwdriver. Erase a Drive 3. Adjust the position of the Rubber Drive Holder to the appropriate position on the Drive Tray. Warning! Backup data prior to erasing any drives. 1. Navigate to Erase Mode and press the Enter Button. 4. Insert the Drive-Tray Screw through the screw hole in the Drive Tray and tighten, using a Phillips Head Screwdriver. Do not over-tighten. 5. Gently slide the Connector on the M2.