HDMI® over Cat 5/6 Extender – 330ft (100m) ST121HDBTPW *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 Introduction......................................................
Product Diagram Front View Transmitter Receiver HDMI® in port Status (Power) LED HDMI® out port Rear View Transmitter Power Jack Instruction Manual Status (Power) LED Receiver Link (RJ-45 Connector) Optional Grounding Bolt Power Jack 1 Link (RJ-45 Connector) Optional Grounding Bolt
Introduction Packaging Contents • 1x HDMI extender • 1x HDMI receiver • 4x mounting brackets • 2x foot pad set • 1x universal power adapter (NA / EU / UK / AU) • 2x grounding wires • 1x 4ft (1m) Cat5e Cable • 2x screw sets • 1x instruction manual System Requirements • HDMI® enabled video source device (i.e. computer, Blu-ray Player) • HDMI enabled display device (i.e.
About LED indicators Both the transmitter and receiver feature LED indicators located on the top of the units. For more information about what the LEDs signify, consult the table below.
Installation 1. Determine where the local video source (i.e. computer, Blu-ray Player) will be located and set up the device. 2. Determine where the remote display will be located and place/ mount the display appropriately. NOTE: This HDMI® extender kit features Power over cable, allowing both the transmitter and receiver to be powered from a single power source that connects to either the transmitter or receiver unit.
3. Install receiver unit a) Position the receiver unit near the video display (i.e. television, projector). b) Connect the video source to the HDMI® out port on the receiver unit using an HDMI® cable. c) (Optional) If you’ve chosen to connect the power adapter to the receiver unit, connect the power adapter from the power adapter port to an available wall outlet. 4. (Optional) Install the grounding wires.
Specifications 1x HDMI® (19 pin) Female Local Unit Connectors 1x RJ-45 Female 1x HDMI® (19 pin) Female Remote Unit Connectors 1x RJ-45 Female Maximum Data Transfer Rate HDMI® - 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.