ST122DVIA ST124DVIA Instruction Manual DVI Video Splitter 2/4-Port DVI Video Splitter with Audio
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Top View - ST122DVIA.................................................................2 Rear View - ST122DVIA...............................................................2 Front View - ST124DVIA......................................
Introduction The StarTech.com DVI Splitter with Audio lets you share one DVI video and audio source on two (ST122DVIA) or four (ST124DVIA) displays and also act as a signal amplifier that allows you to locate your DVI monitors up to 33ft (10m) away.
Top View - ST122DVIA Output 1 LED Power/Input signal LED Output 2 LED Power connector Rear View - ST122DVIA 3.5mm Audio (input) DVI connector (input) 3.5mm Audio (output 2) DVI connector (output 2) 2 3.
Front View - ST124DVIA Output Status LEDs Power/Input Signal LED Rear View - ST124DVIA 3.5mm Audio input 3.
Installation Hardware Installation 1. Make sure all devices are powered off and unplugged. 2. Connect the DVI video source (i.e. computer, HDTV box, etc.) to the Input connector on the splitter, using a standard male/male DVI cable. If using audio, also connect a 3.5mm mini-jack audio cable from the video source to the Input connector on the splitter. 3. NOTE: Use of DVI-D cables is recommended as some DVI video sources may default to using an analog signal, when a DVI-I cable is used. 4.
. Power on the video source device. The Power LED should change to blue to indicate it is receiving a good input signal. Driver Installation No driver installation is required to use the DVI video splitter, as it is an external, hardware-only device, that will not be seen by the host system.
Specifications ST122DVIA Video Signal ST124DVIA DVI-D (digital) Number of Ports 2 3 x 24-pin DVI-I 5 x 24-pin DVI-I Connectors 3 x 3.5mm mini-jack 5 x 3.5mm mini-jack 1 x DC Power 1 x DC Power 1 x Power/Input 1 x Power/Input 2 x Output Link 4 x Output Link LEDs 4 Maximum Video Resolution 1920x1200@60Hz Maximum Distance 10m / 33ft Maximum Video Bandwidth 350MHz HDCP Compliant Yes (1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
