Manual

color-coded output ports located on the A/V source.

2. Connect the remaining end of the RGBHV cable to the corresponding ports,

(marked INPUT) on the rear panel of the distribution amplifier. The necessary ports

will be labelled Pr/R/V, Pb/B/V2, Y/G/V1, L/H and R/V.

3. (OPTIONAL) Insert one end of a standard digital coaxial audio cable into the digital

coaxial output port, provided by the audio/video source.

4. Connect the remaining end of the digital coaxial audio cable into the INPUT audio

port, marked COAXIAL, located on the rear panel of the distribution amplifier.

Connecting the distribution amplifier to the display

1. Insert the connectors from one end of a standard RGBHV video cable into the

color-coded OUTPUT ports located on the distribution amplifier. These ports will be

labelled Pr/R/V, Pb/B/V2, Y/G/V1, L/H and R/V.

2. Connect the remaining end of the RGBHV cable to the corresponding ports,

on the display. For further information on how to locate the necessary ports, please

consult the documentation that accompanied the display at the time of purchase.

3. (OPTIONAL) Connect one end of the digital coaxial audio cable into the OUTPUT

audio port, marked COAXIAL, located on the distribution amplifier.

4. Connect the remaining end of the digital coaxial audio cable into the corresponding

input port located on the display.

ST123HDA used with composite video source

Using a standard composite cable for each connection, you can connect up to three

video sources to the distribution amplifier for use with up to nine displays:

Connecting the A/V source to the distribution amplifier

1.Insert the connector from one end of a standard composite video cable into the

appropriate output port located on the A/V source. For further information as to the

Instruction Manual

Rear Panel

Source 1Source 2Source 3

Video #1

Video #2

Video #3