HDMI® over IP Extender | 1080p Actual product may vary from photos User Manual SKU#: ST12MHDLNV For the latest information and specifications visit www.startech.
Compliance Statements FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Statements Safety Measures • Wiring terminations should not be made with the product and/or electric lines under power. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • Les terminaisons de câblâge ne doivent pas être effectuées lorsque le produit et/ou les câbles électriques sont sous tension.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................2 Product Diagram.....................................................................................4 Transmitter................................................................................................................................................... 4 Receiver.........................
Product Diagram Transmitter 1 2 3 4 1 12V DC Port 2 HDMI In 3 HDMI Out 4 RJ45 Port 5 IR Out Port 5 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Receiver 1 2 3 1 12V DC Port 2 HDMI Out 3 IR In Port 4 RJ45 Port (x2) 4 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents • • • • • • • • HDMI over IP Transmitter x 1 HDMI over IP Receiver x 1 Power Adapter (NA, UK, EU and AU clips) x 2 IR Blaster x 1 IR Receiver x 1 Mounting Screws x 4 Rubber Feet x 8 User Manual x 1 Requirements Display • HDMI Display Device x 1 • (Optional) HDMI Display Device x 1 Video Source Device • Video Source (e.g. Host Computer, Media Player) x 1 Cables • CAT5e/6 Cable x 1 • HDMI Cables x 3 Optional • Network Device (e.g.
Connecting the Extender Point to Point Configuration Point to Point Connecting the HDMI Transmitter 1. Place the HDMI Transmitter near the Video Source Device. 2. Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer). Connect an HDMI Cable to the HDMI Out Port on the HDMI Transmitter and the other end to an HDMI Port on the Display Device (e.g. Monitor). Connecting the HDMI Receiver 1.
2. Connect an HDMI Cable to the HDMI Out Port on the HDMI Receiver and the other end to an HDMI port on the Display Device (e.g. monitor). Connect an Cat5e/Cat6 Cable to the RJ45 Port on the HDMI Receiver and the other end to an RJ45 Port on a HDMI Transmitter. Powering the Extender • Connect the Power Adapters to the 12V DC Port on both the HDMI Transmitter and the HDMI Receiver and the other ends to AC Electrical Outlets. 3.
One Transmitter to Multiple Connections (Network Method) One to Multiple Connection In order to use this configuration, an existing IP network, Network Switch (sold separately), and multiple HDMI Receivers (sold separately) are required. Notes: A minimum of 100Mbps of bandwidth is required per Receiver (e.g. 100Mbps is needed for one transmitter and one receiver). Each Ethernet connection in the setup needs to be at least 100Mbps. Only one transmitter can be connected to a network at a time.
Connecting the HDMI Transmitter 1. Place the HDMI Transmitter near the Video Source Device. 2. Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer). 3. (Optional) Connect an HDMI Cable to the HDMI Out Port on the HDMI Transmitter and the other end to an HDMI port on a Display Device (e.g. monitor).
One Transmitter to Multiple Connections (Cascading Method - Maximum of 3 HDMI Receivers) Cascade Connection In order to use this configuration multiple HDMI Receivers (sold separately) are required. Connecting the HDMI Transmitter 1. Place the HDMI Transmitter near the Video Source Device. Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer). 2.
2. Connect an HDMI Cable to the HDMI Out Port on the HDMI Receiver and the other end to an HDMI Port on the Display Device (e.g. monitor). 3. Connect a CAT5e/6 Cable to the RJ45 Port on the HDMI Receiver and the other end to an RJ45 Port on the HDMI Transmitter. 4. Connect a CAT5e/6 Cable to the RJ45 Port on the connected HDMI Receiver and the other an to the RJ45 Port on a second HDMI Receiver. Repeat step 4 to connect additional HDMI Receivers.
HDMI Receiver: 1. Connect the IR Receiver to the IR In Port on the HDMI Receiver. 2. Position the IR Receiver’s Sensor in the location where you will point the IR Remote Control. (Optional) Mounting the Extender Notes: StarTech.com is not responsible for any damages related to the installation of this product. Prior to mounting, please test the product’s port compatibility with all devices intended for use with this product.
4. Align the large holes on the Mounting Brackets with the Mounting Screws. 5. Slide the HDMI Transmitter and/or HDMI Receiver down, to lock the Mounting Brackets in place. Changing the Power Adapter Clips 1. On the front side of the Power Adapter slide the release button downward, releasing the Power Adapter Clip. 2. Pull the Power Adapter Clip away from the Power Adapter. Align another Power Adapter Clip with the Prongs on the Power Adapter. 3.
Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
