Owners manual
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
ST7200USBM
Mountable Rugged Industrial 7-Port USB2.0 Hub
Installation Guide
Packaging Contents
1 x ST7200USBM USB hub•
1 x USB cable•
1 x Installation Guide•
System Requirements
USB enabled computer system with available port•
USB compliant operating system•
Specications
Bus Interface
USB 2.0
Connectors
7 x USB type A female
1 x USB type B female
1 x 2-wire power terminal block
LEDs
1 x Power
Maximum Data Transfer
Rate
USB 2.0: 480Mbps
Operating Temperature
0°C to 55°C (32°F to 131°F)
Storage Temperature
-20°C to 85°C (-4°F to 185°F)
Humidity
5~95% RH
Dimensions
133.0mm x 61.5mm x 36.3mm
Weight
500g
Installation
Connect the USB type B cable from the USB hub, to an available USB port on the host computer system. No driver
installation is required, as a USB compliant operating system will automatically install it.
OPTIONAL: Power will be provided by the USB port on the host computer system, if additional power is required, an
external power source can be connected to the USB hub via the 2-wire terminal block.
2-Wire Power
Terminal Block
USB type B connector
(Host)
Power LED
USB hub
connectors