Owner's manual

HDMI Video and USB Over IP Receiver for ST12MHDLANU - 1080p
StarTech ID: ST12MHDLANUR
This HDMI® over IP Receiver works with the HDMI over IP Extender Kit (sold separately) and lets you extend
an HDMI signal, as well as four USB peripheral device connections, over your network. You can use additional
receivers (sold separately) to distribute the HDMI signal to multiple locations and combine your remote displays
to create a video wall.
Versatile configuration options
In a point-to-multipoint setup, the HDMI over IP kit can be connected through an unmanaged or managed
Gigabit LAN portal. You can connect one or multiple sources (transmitters) to multiple displays (receivers) over
IP, using a managed Gigabit Ethernet switch (with IGMP). For additional scalability, you can combine up to 16
different transmitters and an unlimited number of receivers, depending on available network bandwidth.
Extend up to four USB devices at each remote display
With a built-in USB extension hub, you can add up to four remote USB devices at each remote display. This
enables you, or your customers, to control a computer at the video source device from the remote location and
lets you create interactive digital signage to engage your customers. Or, if you're using the video-over-IP
extender as part of your I.T infrastructure, you can use the USB extenders to add a remote KVM console that
you can use to control your servers from different remote locations.
Manage your video distribution from your mobile device
The HDMI distribution kit features easy-to-use video control software that helps you manage your IP video
distribution. The app is simple to set up, with automatic hardware detection, and it lets you switch video sources
for each remote display. You can also create and manage a video wall for an impressive digital signage
presentation, to catch the attention of your audience.
The software is available on iOS for your iPhone or iPad, Android™ for your smartphone or tablet, and Google
www.startech.com
1 800 265 1844