User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
10
M8x50 mm screws
Qty: Four
TV washers
Qty: Four
Small spacers
Qty: Eight
Large spacers
Qty: Eight
Instruction manual
Qty: One
Requirements
• A TV that is compatible with one of the VESA mounting hole patterns STNDMTV70
supports
• A Phillips™ type screwdriver
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/STNDMTV70.
37 38
39
40
41