User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
17
5. Snap an end cap onto each of the four ends of the crossbars. (gure 9)
gure 9
Crossbar
End cap
Attach the support plate to the column
1. Lift up the support plate and hook the top of the support plate onto the protrusion
and the studs on the column. (gure 10)
gure 10
Column
Support plate
Protrusion
Stud