User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
28
4. Use a Phillips type screwdriver to tighten the M6x14 mm screws.
5. To secure the TV in the landscape position, insert two of the M6x8 mm screws into
the support plate and use a Phillips type screwdriver to tighten the screws.
(gure 18)
To move the TV into portrait orientation, see the “Change the orientation of the TV”
gure 18
M6x8 mm
screw
M6x8 mm
screw