User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
36
multimedia shelf downwards.
8. Insert two M6x14 mm screws into the multimedia shelf and into the shelf bracket.
9. Use a Phillips type screwdriver to tighten all four of the M6x14 mm screws. (gure
25)
Attach the camera shelf
gure 26
1. Line up the holes on the camera shelf with the holes on the end of the connecting
plate.
2. Insert the three countersunk screws through the top of the camera shelf and into
gure 27
Camera shelf
Connecting plate
Countersunk screw
M4x6 mm screw
Camera shelf
Connecting plate