User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
37
the connecting plate.
3. Use a Phillips type screwdriver to tighten the countersunk screws. (gure 26)
4. Insert the two M4x6 mm screws into the camera shelf and into the side of the
connecting plate. (gure 27)
5. Use a Phillips type screwdriver to tighten the screws in place.
gure 28
Connecting plate
Column
M6x25 mm screw