User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
3
Technical specications
Unless otherwise indicated, the technical specications in the table below apply to the
TV.
Type of measurement Measurement
VESA mounting hole pattern on the
TV mount
200x200
300x300
400x200
400x400
600x400
Weight capacity of TV mount
40 kg
(88 lb.)
Lift capacity of TV mount
8 to 25 kg (18 to 55 lb.)
Note: If you exceed the lift
capacity, you will require
additional manual force to raise
the TV.
Weight capacity of multimedia shelf
5 kg (11 lb.)
Weight capacity of camera shelf
5 kg (11 lb.)
Screen size
32” to 75”