User Manual

Instruction manual
9
3. Remove the backing from three of the foam pads (13).
4. On the left side of the tablet holder, stick two of the foam pads to the inside of the
metal tabs.
5. On the right side of the tablet holder, stick one of the foam pads to the inside of the
metal tab (gure 9).
Stick the foam pads to the inside of
the metal tabs.
6. Remove the backing from three of the foam blocks (14).
7. At the top of the tablet holder, stick one of the foam blocks to the inside of the
metal tab.
8. At the bottom of the tablet holder, stick two of the foam blocks to the inside of the
metal tabs (gure 10).
gure 9
gure 10
Tablet holder
Foam pads
Tablet holder
Foam blocks