User Manual

ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 2 Port DisplayPort KVM Switch, 4K 60Hz, Compact Dual Port UHD DP 1.2 USB Desktop KVM Switch w/ Integrated 4ft Cables & Audio, Bus Powered & Remote Switching, MacBook ThinkPad 4K KVM Switch w/ Audio - KVM / audio switch - 2 ports

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 6, 2019 10:31 AM

Product Diagram (SV211DPUA4K)

Component Function

1 DisplayPort Connector • Connect a DisplayPort Enabled Computer

Microphone Audio

Connector

• Connect the Microphone Audio to the

Computer

3 USB-A Connector

• Transmit the signal of a Keyboard and Mouse

from the KVM Switch to the Computer

4 Microphone Audio Port • Connect a Microphone

5 Stereo Audio Connector

• Connect the Speaker Audio from the

Computer

6 USB HID Ports

• Connect a Keyboard and Mouse

• (Optional) Connect USB Peripherals

7 DisplayPort Port • Connect a DisplayPort Display

8 LED Indicators • Indicates Computer selection and activity

9 Stereo Audio Port • Connect Stereo Speakers

10 Remote Switch

• A wired button used to switch between

Computer 1 and 2

• Press and Release the Remote Switch to

switch between Computer 1 and 2

2-Port USB DisplayPort™ Cable KVM Switch w/ Audio and Remote Switch - 4K 60Hz

Requirements

• DisplayPort Enabled Computers x 2

• DisplayPort Display x 1

• USB HID Devices (Keyboard and Mouse) x 2

• (Optional) USB Peripherals x 2

• (Optional) Microphone x 1

• (Optional) Stereo Speakers or Headphones x1

• (Optional) Headset x 1

Note: A Headset may require the use of a Headset Adapter. Check with the

manufacturer of the Headset for more details.

• (Optional) 3.5 mm Audio Cables x 2

For the latest requirements and to view the full User Manual, please visit

www.startech.com/SV211DPUA4K.

Installation

Connect the Computers

1. Connect the built-in Computer 1 DisplayPort Connector to the DisplayPort Port

on Computer 1.

2. Connect the built-in Computer 1 USB-A Connector to the USB-A Port on

Computer 1.

3. (Optional) Connect the built-in Computer 1 Stereo Audio Connector (green) to the

3.5mm Stereo Audio Port on Computer 1.

4. (Optional) Connect the built-in Computer 1 Microphone Audio Connector (pink)

to the 3.5m Microphone Audio Port on Computer 1.

5. Repeat steps 1-4 to install Computer 2.

Connect the Console

1. Connect the USB-A Devices (Keyboard, Mouse, or USB Peripherals) to the USB-A

Ports on the KVM Switch using the built-in Keyboard and Mouse USB Cables or

USB-A Cables (sold separately).

2. (Optional) Connect a 3.5 mm Audio Cable from the Stereo Speakers or

Headphones to the Speaker Audio Port (pink) on the KVM Switch.

3. (Optional) Connect a 3.5 mm Audio Cable from the Microphone to the

Microphone Audio Port (pink) on the KVM Switch.

3 5

Summary of content (2 pages)

PAGE 1
Quick-Start Guide 2-Port USB DisplayPort™ Cable KVM Switch w/ Audio and Remote Switch - 4K 60Hz Product Diagram (SV211DPUA4K) Requirements 10 4 1 2 3 8 5 For the latest requirements and to view the full User Manual, please visit www.startech.com/SV211DPUA4K.
PAGE 2
Operation About the LED Indicators LED Behavior Significance LED is illuminated orange A Computer is selected and a link has been established LED is flashing orange A Computer is selected but not detected Hotkey Reference Guide • Windows® Keyboard: To switch Computers the hotkey combination is Scroll Lock + Scroll Lock • Mac Keyboard (or a Windows Keyboard with no Scroll Lock): Use the Included Software to define the new hotkey sequence.