2/4 Port USB DisplayPort® KVM Switch with Audio SV231DPUA / SV431DPUA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction ............................................................................................1 Features......................................................................................................................................................... 1 Package Contents ..................................................................................................................................... 1 System Requirements...................................................
Introduction Features • Easy installation, no drivers required • Supports Plug and Play and hot swap to save time from rebooting the computer • Supports data transfer rates up to 480Mbps when used on a USB 2.0 port Package Contents • • • • SV231DPUA or SV431DPUA KVM switch Power Adapter Rubber Feet Instruction Manual System Requirements • • • • • DisplayPort enabled computer system/video card USB enabled computer system DisplayPort enabled display device (e.g. monitor, projector, TV, etc.
Hardware Installation Front View - SV231DPUA Port Selection/Link LED Port Selection Button Rear View - SV231DPUA Instruction Manual 2
Front View - SV431DPUA Port Selection/Link LED Power LED Port Selection Button Rear View - SV431DPUA Instruction Manual 3
*installation pictures are representations only 1. Plug a monitor into the Console’s DisplayPort connector; plug a USB keyboard and a USB mouse into the dedicated USB keyboard and mouse ports on the KVM switch. If using audio, also connect speakers and/or a microphone with 3.5mm mini-jack plugs. 2. Use a male-to-male DisplayPort video cable to connect the DisplayPort connector on the computer’s video card, to one of the KVM’s PC ports (i.e. PC1) 3.
used in place of separate individual cables, StarTech.com ID: DP4N1USB6. 4. Repeat for Steps 2 and 3 for each PC port on the KVM switch, or each computer you wish to use on the KVM. 5. OPTIONAL: Connect any other USB peripherals you wish to share between the connected computers/devices to the extra USB Hub ports on the Console side. 6. Connect the external power adapter from a wall outlet to the power connector on the rear panel of the KVM switch.
Port Selection Button 2-Port: Pressing the front panel “Select” button will toggle between the two ports on the KVM switch. 4-Port: Each push button on the front panel corresponds with a PC port. Pressing that button will immediately select that port. AutoScan The system automatically scans through the power-on computers in sequence with a fixed interval (see Scan Time below). 4-Port: To activate AutoScan, press front panel push buttons “3” and “4” simultaneously.
To select a computer: Left + Left + <1> (Example: Selects the computer at port 1.) Left + Left + <2> (Example: Selects the computer at port 2.) NOTE: Do not use the keypad on the right-side of the keyboard. Auto Scan The KVM automatically scans through the powered-on computers in sequence on a fixed time interval (see Scan Time below). Note: The keyboard and mouse are not operable during Auto Scan.
Scan Time Four options are available for users to set the Scan Time duration, it includes 3, 8, 15 and 30 seconds. Note: Scan Time is set to 3 seconds by default. To adjust Scan Rate, set the scan time of duration before switching to the next computer: Left + Left + The KVM Switch generates 1 to 4 beeps indicating a scan time duration for 3, 8, 15 or 30 seconds respectively. Audio Lock There are two options for Audio Lock: ON and OFF. When ON, audio selection follows computer selection.
Alternative Hotkey Commands In addition to the Left + Left hotkeys, there are two alternative hotkey sequences available. 1. 1. For the following operations, users may press twice instead of pressing left twice. To select a computer: + + <1> (Example: Select the computer at port 1.) + + <2> (Example: Select the computer at port 2.) NOTE: Do not use the keypad at the right of the keyboard.
2. For those keyboards that do not have or support , please press and HOLD the Left and press twice instead of pressing Left twice. To select a computer: hold Left + press + press then release + press <1> Example: Select the computer at port 1.) hold Left + press + press then release + press <2> (Example: Select the computer at port 2.) NOTE: Do not use the keypad at the right of the keyboard.
Specifications SV231DPUA Number of Ports SV431DPUA 2 4 1 x DisplayPort Computer Connectors (per port) 1 x USB type B 2 x 3.5mm mini-jack 1 x DisplayPort Console Connectors 1 x USB type 2 x 3.
SV231DPUA SV431DPUA Operating 0°C ~ 40°C (32°F ~ 104°F) Temperature Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Humidity Dimensions (WxHxD) Weight Instruction Manual 0 ~ 80% RH 160.0mm x 44.0mm x 220.7mm x 44.0mm x 100.0mm 130.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a three year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
