User Manual

ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 2 Port HDMI KVM Switch, Single Monitor 4K 60Hz Ultra HD HDR, Desktop HDMI 2.0 KVM Switch with 2 Port USB 3.0 Hub (5Gbps) & 4x USB 2.0 HID Ports, Audio, Hotkey Switching, TAA KVM with Fast Switching - KVM / audio switch - 2 ports - rack-mounta

Manual Revision: 07/29/2022

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SV231HU34K6

SV231DHU34K6

2-Port USB 3.0 KVM Switch - HDMI - 4K 60Hz

2-Port USB 3.0 KVM Switch - Dual HDMI - 4K 60Hz

*actual product may vary from photos

*SV231HU34K6 shown above

Summary of content (10 pages)

PAGE 1
2-Port USB 3.0 KVM Switch - HDMI - 4K 60Hz 2-Port USB 3.0 KVM Switch - Dual HDMI - 4K 60Hz SV231HU34K6 SV231DHU34K6 *actual product may vary from photos *SV231HU34K6 shown above DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Table of Contents Introduction ............................................................................................1 Packaging Contents ................................................................................................................................. 1 Product Overview ..................................................................................1 Front View (SV231HU34K6) .............................................................................................................
PAGE 4
Introduction Packaging Contents • • • • KVM Switch x 1 Universal Power Adapter (NA/JP, EU, UK, ANZ) x 1 Rubber Feet x 4 Quick-Start Guide x 1 Product Overview Front View (SV231HU34K6) 1 USB HID Port USB Hub Port Port Selection LED Indicators Port Selection Button Rear View HDCP Firmware Upgrade Port Switch HDMI Console EDID Output Port Button PC2 HDMI Input Port PC1 HDMI Input Port USB Hub Port PC2 PC1 USB HID Ports Power Input USB Port USB Port Console PC2 PC1 Port Audio Port Audio Port Audio Po
PAGE 5
Front View (SV231DHU34K6) USB HID Port USB Hub Port Port Selection LED Indicators Port Selection Button Rear View HDCP Firmware Upgrade Port Switch HDMI Console EDID Output Port Button PC2 HDMI Input Port PC1 HDMI Input Port USB Hub Port PC2 PC1 USB HID Ports Power Input USB Port USB Port Console PC2 PC1 Port Audio Port Audio Port Audio Port Instruction Manual 2
PAGE 6
LED Indicators PC Selection Indicators Green = PC Connected Red = Port selected EDID LED Indicator 2x Fast Flashes = EDID Copy mode 3x Slow Flashes = Auto EDID 3x Fast Flashes = Default Setting Installation Attach The Rubber Feet To affix the Rubber Feet to the bottom of the KVM switch, peel off the backing on each of the four Rubber Feet and adhear them to the bottom of the KVM Switch, in the indicated areas. Connect the Console 1.
PAGE 7
4. (Optional) Connect a 3.5 mm Audio Cable from the Audio Port on the Computer to the corresponding PC 1 Audio Port on the rear of the KVM Switch. 5. Repeat Steps 1 to 4 for PC 2. Operation HDCP Switch Note: If the HDCP version needs to be changed after the initial installation, a power cycle of the KVM and connected devices may be required. The HDCP Switch, located on the rear of the KVM Switch, is used to set the HDCP version the KVM Switch will use with connected devices.
PAGE 8
EDID Button The EDID Button, located on the rear of the KVM Switch, is used to set how the KVM Switch will handle EDID information.
PAGE 9
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
PAGE 10
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.