Operation Manual

Instruction Manual
4
NOTE: DVI + USB + Audio KVM combo cables are also available which can be used in place of
separate individual cables
(e.g. StarTech.com ID: DVI4N1USB6)
4. Repeat Steps 2 and 3 for each PC port on the KVM switch, or each computer you wish to use
on the KVM.
5. OPTIONAL: Connect any other USB peripheral you wish to share between the connected
computers/devices to the extra USB Hub port on the Console side.
6. Connect the external power adapter from a wall outlet to the power connector on the rear
panel of the KVM switch.
7. Power up the rst computer/device and wait for it to fully boot and test keyboard/mouse
functionality.
8. Once operation has been successfully conrmed, switch to the next port and power up that
computer/device and conrm.
9. Once completed for all computers/devices connected to the KVM switch, you should be able
to switch between ports freely.
Driver Installation
No driver installation is required for the KVM switch, as the keyboard/mouse use USB drivers that
are already installed on any operating system that fully supports USB.
*Computer Setup