4-Port USB KVM Switch - DisplayPort - 4K 60Hz SV431DPUA2 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/SV431DPUA2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product diagram.....................................................................................1 Front view..................................................................................................................................................... 1 Rear view....................................................................................................................................................... 1 Package contents..................................................
Troubleshooting......................................................................................9 I can’t get my wireless mouse and keyboard to work................................................................... 9 I can’t get my gaming or combination mouse and keyboard to work................................... 10 My display or video destination uses a different type of video connector than DisplayPort..................................................................................................
Product diagram Front view Port selection/link LEDs Power LED Port selection buttons Rear view Console DisplayPort port USB keyboard and mouse ports Console USB ports Console audio speaker and mic ports Power adapter port Instruction manual PC 3 ports PC 1 ports PC 2 ports PC 4 ports 1
Package contents • 1 x KVM switch • 4 x foot pads • 1 x universal power adapter (NA/JP, EU, UK, ANZ) • 1 x quick-start guide Requirements • DisplayPort™ • cables • USB-A to USB-cable or USB-C to USB-B cable’ • 3.
About the LED indicators The KVM switch comes with a port selection/link LED for each port, as well as a power LED. For more information about the LEDs, consult the table below.
3. Do one of the following: • Connect a keyboard and a mouse to the USB keyboard and mouse ports. • If you’re using a combination wireless keyboard and mouse, connect the wireless receiver to the keyboard port. 4. If necessary, do any of the following: • Connect speakers to the console audio speaker port. • Connect a microphone to the console mic port. • Connect USB peripherals to the USB hub ports. Connect a computer to the KVM switch You can connect up to four computers to the KVM switch. 1.
About drivers You don’t need to install any drivers to use this KVM switch because the keyboard and mouse use generic USB drivers that are already installed on any operating system that supports USB technology. Select a computer To select a computer, do one of the following: • Push the port selection button for the connected computer that you want to select. The port selection/link LED illuminates red to indicate the selected port.
Set the duration of the scan time You can set the duration of the scan time to 3, 8, 15, or 30 seconds. To change the scan time, do one of the following: • Press port selection buttons 1 and 2 simultaneously. The KVM switch beeps to indicate the duration of the scan time. It will beep once for 3 seconds, twice for 8 seconds, three times for 15 seconds, and four times for 30 seconds. • If you’re using a computer that’s running a version of Windows or Linux, you can use hotkey commands to start an Auto Scan.
Select a computer • To select a computer, press the Left Ctrl key twice and the number of the PC port that you want to select. For example, if you want to select computer 2, you would press Left Ctrl, Left Ctrl, 2. Caution! Don’t use the numeric keyboard on the right side of your keyboard when you complete the hotkey command above. Start an Auto Scan • To start an Auto Scan, press Left Ctrl, Left Ctrl, F1. The port selection/link LEDs blink during the Auto Scan process.
To stop the manual scan, press any key. Disable the Audio Stick feature By default, the Audio Stick feature is enabled on the KVM switch, which means that the audio selection is determined by the computer that is currently selected. For example, if you switch to computer 2, the audio selection changes to computer 2. You can disable the Audio Stick feature and make the audio selection independent from the computer that is currently selected.
Use an alternative hotkey command In addition to the Left Ctrl hotkey commands, there are two alternative commands that you can use to select a computer: • Press Scroll Lock, Scroll Lock, . • Press and hold the Left Shift key and press Num Lock twice. Release the Left Shift key and then press the number of the port that you want to select. Note: Do not use the numeric keypad on the right side of the keyboard when you complete the hotkey commands listed above.
I can’t get my gaming or combination mouse and keyboard to work Gaming mice and keyboards and combination mice and keyboards have more buttons and functionality than 3-button mice and 104-key keyboards. Most KVM switches don’t support the additional key functions and using them in your setup may impact the performance of your KVM switch. As such, StarTech.com recommends that you might use a standard 3-button wired mouse and a 104-key wired keyboard in your setup.
1. In the Control Panel, navigate to the display settings. 2. To see how the operating system has ordered the monitors, click Identify. 3. Click and drag the monitor icons until the order in the operating system matches the physical setup of the monitors. 4. Click OK to apply the changes and close the window.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a three-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
