Manual

Instruction Manual
2
cannot exceed 500 feet (150 meters), including patch cables (if used).
Category 5e and 6 cabling is compatible with this product and may im-
prove performance.
NOTE: Long cable lengths between the Host and Remote Units may
adversely affect image quality at high resolutions and refresh rates. If you
need to run your remote displays at high resolutions and frequencies, use
as little cabling between locations as possible and avoid practices such as
“coiling” unused cable in a ceiling.
This product will also control a KVM switch, allowing you to manage more
than one computer remotely. In this configuration, you can connect the
KVM extender’s Host Unit to the “console” ports on the KVM. You must
use the provided power adapters if using this configuration. You should
set the Host Unit to Compatibility Mode before connecting it to a KVM that
uses the [Ctrl] key as its hotkey sequence; see page 8 for details.
Package Contents
1 x Host Unit
1 x Remote Unit
1 x Instruction Manual
1 x Power adapter
2 x 6 ft. 2-in-1 USB VGA KVM cables
1 x Set of rubber mounting feet