USB Video Capture Cable - S-Video or Composite Actual product may vary from photos User Manual SKU#: SVID2USB232 For the latest information and specifications visit www.startech.
Compliance Statements FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Statements Safety Measures • Wiring terminations should not be made with the product and/or electric lines under power. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • Les terminaisons de câblâge ne doivent pas être effectuées lorsque le produit et/ou les câbles électriques sont sous tension.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................2 Product Diagram.....................................................................................4 Product Information...............................................................................5 Packaging Contents............................................................................
Product Diagram 1 2 3 1 USB-A Connector (Host) 2 S-Video Connector (Input) 3 RCA Connector (Input) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Packaging Contents • • • • USB Video Capture Cable x 1 Software CD w/ Activation Key x 1 Driver CD x 1 User Manual x 1 Requirements • • • Host Computer with available USB-A port Windows® 7, 8.1, and 10 Analog Video Source with S-Video or Composite Cabling (DVD, DVR, etc.) Hardware Installation 1. Connect the USB-A Connector (Host) to an available USB-A port on the Host Computer system. 2. Connect an Analog Video Source Device (e.g. DVD, DVR etc.
Software Installation Driver Installation 1. After completing the hardware installation, the Found New Hardware Wizard will open. Click the Cancel button to close the screen. 2. Download the latest drivers from the Support tab on the website www.startech.com/SVID2USB232 3. Locate the Setup.exe file, it will be located in the Windows directory in the downloaded folder. 4. If a Windows Security Dialog screen appears, click Run or Install this driver software anyway to proceed. 5.
Device Manager Screen Video Capture Software Installation (Optional) An Activation Key for the Video Capture Software comes with the Software CD. You will need the Activation Key to access the Video Capture Software. Note: Keep the Video Capture Software Activation Key in a safe place in case you need to reference it again in the future. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
1. Insert the Software CD into a CD-ROM drive, the Setup should launch automatically. If not, use Windows Explorer to navigate to the appropriate CD-ROM drive and start the Movavi Video Editor 11 SE Setup. 2. Follow the on-screen prompts until installation is complete. 3. When requested, enter the Activation Key that is printed on the outside of the CD ROM case. Note: The Video Capture Cable will work with any Windows based video capture software.
Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.