User Manual
ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 1 Port Gigabit PoE Injector & Splitter Kit, 60W High Power over Ethernet Injector 100m/12-24V DC Splitter 802.3bt Midspan Single Port Ultra PoE LAN/RJ45 Security/Monitoring PoE Injector/Splitter - PoE injector + PoE splitter - 60 Watt
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Connect an Ethernet Cable to the PoE Output Port on the
Injector.
Connecting the Splitter
7. Toggle the DC Output Switch to the desired voltage for your
application. Consult the manufacturer’s documentation to
determine the proper input voltage setting for your Network
Device.
Note: Before changing the output voltage, disconnect the
Ethernet Cable from the PoE Input Port on the Splitter.
8. Connect the other end of the Ethernet Cable to the PoE
Input Port on the Splitter.
9. Connect an Ethernet Cable to the Ethernet Data Port on the
Splitter.
10. Connect the other end of the Ethernet Cable to your
Network Device.
11. Connect the appropriate DC Plug Cable for your application
(barrel type M-M or M-N) to the DC Output Power Port on
the Splitter.
12. Connect the other end of the DC Plug Cable to your Network
Device.
Connecting the Splitter Only
1. Connect an Ethernet Cable to your PoE PSE Network Device.
2. Toggle the DC Output Switch to the desired voltage for your
application. Consult the manufacturer’s documentation to
determine the proper input voltage setting for your Network
Device.