User Manual
ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 1 Port Gigabit PoE Injector & Splitter Kit, 60W High Power over Ethernet Injector 100m/12-24V DC Splitter 802.3bt Midspan Single Port Ultra PoE LAN/RJ45 Security/Monitoring PoE Injector/Splitter - PoE injector + PoE splitter - 60 Watt
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: Always disconnect the Ethernet Cable from the PoE
Input Port on the Splitter before changing the output voltage.
3. Connect the other end of the Ethernet Cable to the PoE
Input Port on the Splitter.
4. Connect an Ethernet Cable to the Ethernet Data Port on the
Splitter.
5. Connect the other end of the Ethernet Cable to your non-
PoE Network Device.
6. Connect the appropriate DC Plug Cable for your application
(barrel type M-M or M-N) to the DC Output Power Port on
the Splitter.
7. Connect the other end of the DC Plug Cable to your non-PoE
Network Device.
Connecting the Injector Only
1. Toggle the PoE Mode Switch to Standard Mode. See the
Injector - PoE Mode Switch section for details regarding the
special applications that require Legacy mode to be enabled.
2. Connect an Ethernet Cable to your non-PoE Network Device.
3. Connect the other end of the Ethernet Cable to the Ethernet
Data Port on the Injector.
4. Connect the Universal Power Adapter to the DC Power Input
Port.
5. Connect the other end of the Universal Power Adapter to a
AC Electrical Outlet.
6. Connect an Ethernet Cable to the PoE Output Port on the
Injector.