User Manual
ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 1 Port Gigabit PoE Injector & Splitter Kit, 60W High Power over Ethernet Injector 100m/12-24V DC Splitter 802.3bt Midspan Single Port Ultra PoE LAN/RJ45 Security/Monitoring PoE Injector/Splitter - PoE injector + PoE splitter - 60 Watt
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
*Legacy Mode
The legacy detection feature identies connected devices that
do not comply with the IEEE 802.3af/at/bt standard. See Injector
- PoE Mode Switch for details.
Injector LEDs (Side)
LED Label Behavior PoE Usage Indication
POE
Usage
20W
O Less than 9W
Blinking Orange 10W to 19W
Solid Orange 20W to 29W
40W
Blinking Orange 30W to 39W
Solid Orange 40W to 49W
60W+
Blinking Orange 50W to 59W
Solid Orange
Maximum PoE
wattage
Switches
Splitter - DC Output DIP Switch
Warning: Always ensure you are selecting the proper output
voltage. Incorrect voltage selection may cause damage to
your equipment.
The DC Output DIP Switch lets you select the output voltage for
non-PoE Devices. To operate the DC Output Switch, you must
toggle the Switch to the desired output voltage (12V, 19V, or
24V).