User Manual
ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 1 Port Gigabit PoE Injector & Splitter Kit, 60W High Power over Ethernet Injector 100m/12-24V DC Splitter 802.3bt Midspan Single Port Ultra PoE LAN/RJ45 Security/Monitoring PoE Injector/Splitter - PoE injector + PoE splitter - 60 Watt
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: Always disconnect the PoE Input Cable before chang-
ing the output voltage.
Injector - PoE Mode Switch
The PoE Mode Switch allows you to switch between Standard
and Legacy PoE modes.
Standard: For all applications that use devices that conform to
the IEEE 802.3af/at/bt standards. Normal use of the Injector will
require this switch setting to be enabled.
Note: Check the manufacturer’s technical documentation
for details regarding the standards followed by the equip-
ment in your application.
Legacy: For all applications that use devices that do not
conform to the IEEE 802.3af/at/bt standards. The Legacy setting
may be required for non-standard PoE Devices, such as some
PTZ cameras.