User Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 09/29/2011
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x3.5”FrontPanelUSB3.0Hub
• 1xUSB3.0Cable
• 1xMountingScrewKit
• 1xInstructionManual
System Requirements
• Available3.5”frontbayopeningoncomputercase
• Available15-pinSATApowerconnectoronpowersupply
• AvailableinternalorexternalUSB3.0typeAport
35BAYUSB3S4
4 Port USB 3.0 Panel Hub for 3.5” Front Bay - Black
Installation
WARNING! Computer parts can be severely damaged by static
electricity. Be sure that you are properly grounded before opening
your computer case. StarTech.com recommends that you wear
an anti-static strap when installing any computer component. If
an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface
(such as the computer case) for several seconds.
1. Turnyourcomputeroandanyperipheralsconnectedtothe
computer(i.e.Printers,externalharddrives,etc.).Unplugthe
powercablefromtherearofthepowersupplyonthebackofthe
computeranddisconnectallperipheraldevices.
2. Removethecoverfromthecomputercase.Seedocumentation
foryourcomputersystemfordetails.
3. Removethecoverplateona3.5”frontbayopening.See
documentationforyourcomputersystemfordetails.
4. Slidethe35BAYUSB3S4panelintothe3.5”bayandsecuretothe
computercase.
5. ConnectaSATApowerconnectorfromthecomputerpower
supplytothe35BAYUSB3S4.
6. ConnecttheUSB3.0cablefromthe35BAYUSB3S4toanavailable
USB3.0connector.Ifnointernalportsareavailable,youmay
needtoroutethecableoutsidethecaseanduseanexternalport.
7. Placethecoverbackontothecomputercase.
8. Insertthepowercableintothesocketonthepowersupplyand
reconnectallotherconnectorsremovedinStep1.
SATA Power
connector
USB 3.0 type B
connector (host)
*actual product may vary from photos
Port Link LEDs
USB 3.0 type A connector
Front View
Rear View