User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com 4 Port USB 2.0 Extender Hub over Single CAT5e/CAT6 Ethernet Cable (RJ45), 330ft (100m), USB Extender Adapter, Externally Powered, 480 Mbps, Metal USB Extender Kit Power/Link LEDs - USB extender - USB 2.0

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 1, 2021 9:14 AM

Product Diagram (USB2004EXT100)

Local Transmitter

Remote Receiver

Component Function

1 Status LED (Local) • Green: The Local Transmitter is receiving power

RJ45 Link Port (Local/

Remote)

• Connect a Cat5e Cable (or better) between the

Local Transmitter and Remote Receiver

3 USB Mini-B Host Port

• Connect the Local Extender to the Host Computer

using a USB-A to USB Mini-B Cable

4 Status LED (Remote)

• Red: The Remote Receiver is receiving power but

not linked to the Local Transmitter

• Blue: The Remote Receiver is receiving power and

linked to the Local Transmitter

5 USB Mini-B Power Port

• Connect the Remote Receiver to the USB Power

Adapter using a USB-A to USB Mini-B Cable

6 USB-A Port

• Connect USB Peripheral Devices to the Remote

Receiver

4 Port 100m USB 2.0 Extender over CAT5e

Product Information

For the latest product information, technical specications, manuals, and Declarations

of Conformance please visit: www.StarTech.com/USB2004EXT100

Package Contents

• Local Transmitter x 1

• Remote Receiver x 1

• USB-A to USB Mini-B Cables x 2

• CAT5e Cable x 1

• Universal Power Adapter (NA/JP, EU, UK, ANZ) x 1

• Rubber Feet x 8

• Quick-Start Guide x 1

Installation

1. Position the Local Transmitter near the Host Computer.

2. Position the Remote Receiver near an AC Electrical Outlet.

3. Connect a Cat5e Cable (or better) to the RJ45 Link Port on the Local Transmitter

and the other end to the RJ45 Link Port on the Remote Receiver.

Note: The Cat5e Cabling cannot go through any networking equipment (router,

switch, etc.).

4. Connect USB Devices to the USB-A Ports on the Remote Receiver.

5. Plug the Universal Power Adapter into the AC Electrical Outlet

6. Connect the Universal Power Adapter to the USB Mini-B Power Port on the

Remote Receiver using a USB-A to USB Mini-B Cable.

7. Connect the Host Computer to the USB Mini-B Host Port on the Local Transmitter

using a USB-A to USB Mini-B Cable.

2 3

Summary of content (2 pages)

PAGE 1
Quick-Start Guide 4 Port 100m USB 2.0 Extender over CAT5e Product Diagram (USB2004EXT100) Product Information Local Transmitter For the latest product information, technical specifications, manuals, and Declarations of Conformance please visit: www.StarTech.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.