USB 3.0 to SATA or IDE Hard Drive Adapter Converter USB3SSATAIDE *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Hard Drive Adapter.....................................................................
Introduction Packaging Contents • 1x USB 3.0 to SATA/IDE converter • 1x SATA Cable • 3x AC Power Cord (NA/UK/EU) • 1x Power Supply • 1x Driver CD • 1x Instruction Manual System Requirements • Available USB 3.
Hard Drive Adapter Power Adapter Instruction Manual 2
Installation WARNING: • Do not disconnect any cables or power sources while the connected hard drive(s) is/are active. This can result in data loss and possible damage to the hard drive. To avoid this, please follow the steps outlined in the section entitled Removing Connected Drives. • Please ensure that the hard drive(s) has(have) been connected to the adapter prior to connecting the adapter to the host computer. Hardware Installation 1.
SATA Drive 1. Insert one connector provided by a SATA data cable, into the SATA port on the Hard Drive Adapter. 2. Insert the remaining connector provided by the SATA data cable, into the SATA data port on the SATA hard drive. 40/44-pin IDE Drive 1. Align the IDE drive interface on the hard drive with the appropriate port provided by the hard drive adapter. 2. Gently, but firmly insert the IDE Connector (provided by the adapter) into the port on the rear panel of the hard drive.
Connect the Drive(s) to the Power Adapter WARNING! When connecting the hard drive to the Power Adapter, please ensure that the mini-switches (located on the main power switch) are set to the OFF position, prior to establishing a connection. Failure to do so could result in damage to the drive, or an electrical shock to the user. SATA Drive Insert the SATA power connector provided by the power adapter into the SATA power port on the rear panel of the SATA hard drive.
Removing Connected Drives WARNING! Do not remove a connected hard drive while the drive is in use. To prevent data loss or damage to the drive(s), please follow the instructions below. Removing a connected drive safely requires that the drive not be in use. To ensure that this is the case, you can remove the drive in one of the two following ways: 1. Click on the Safely Remove Hardware icon, in the taskbar, and select Safely Remove USB Mass Storage Device. 2.
Specifications Host Interface USB 3.0 External Connectors 1 x 15 pin SATA Power female 1 x 4 pin Power (LP4) Female 1 x 40 pin IDE Female 1 x 44 pin IDE Female 1 x 7 pin SATA Data male 1 x USB type A male LEDs 1 x USB Link 1 x IDE Detect/Activity 1 x SATA Detect/Activity Maximum Data Transfer Rate USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.