Technical Specs
Instruction manual
11
3. Highlight Utility and press the OK button.
4. Highlight Do Format and press the OK button.
5. Highlight FAT16 Format and press the OK button.
6. When the conrmation message appears, press the OK button.
7. To check the formatting status, progress, and information about the USB ash
drives, use the UP and DOWN arrows to navigate through the USB ash drive ports.
Format a USB ash drive to FAT32
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Do Format and press the OK button.
5. Highlight FAT32 Format and press the OK button.
6. When the conrmation message appears, press the OK button.
7. To check the formatting status, progress, and information about the USB ash
drives, use the UP and DOWN arrows to navigate through the USB ash drive ports.
Set the FAT16 cluster size
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Do Format and press the OK button.
5. Highlight Set FAT16 Cluster Size and press the OK button.
6. Highlight any of the following and press the OK button:
• Auto
• 4KB
• 8KB
• 16KB
• 32KB
• 64KB