Technical Specs

Instruction manual
12
Set the FAT32 cluster size
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Do Format and press the OK button.
5. Highlight Set FAT32 Cluster Size and press the OK button.
6. Highlight any of the following and press the OK button:
• Auto
• 4KB
• 8KB
• 16KB
• 32KB
• 64KB
Erasing USB ash drives
The duplicator and eraser features three dierent types of erasing: quick erase, full
erase, and DoD erase.
Perform a quick erase
When you perform a quick erase, the entire contents of the USB ash drive are erased
and the USB ash drive is left unformatted. This type of erase process is the fastest.
Warning! When you complete the following steps, all of the data on your USB ash
drive is deleted. If your USB ash drive has data on it that you require, you should
create a backup le or use a dierent USB ash drive.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into any of the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Quick Erase and press the OK button.
5. When the conrmation message appears, press the OK button.
Tip! To check the status of the erase process, use the UP and DOWN buttons to move
through the list of the USB ash drive ports.