Technical Specs
Instruction manual
13
Perform a full erase
When you perform a full erase, the system completes a single-pass overwrite and
erases the entire contents and format of the USB ash drive. This type of erase process
can take longer to complete than the quick erase process.
Warning! When you complete the following steps, all of the data on your USB ash
drive is deleted. If your USB ash drive has data on it that you require, you should
create a backup le or use a dierent USB ash drive.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into any of the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Full Erase and press the OK button.
5. When the conrmation message appears, press the OK button.
Tip! To check the status of the erase process, use the UP and DOWN buttons to move
through the list of the USB ash drive ports.
Perform a DoD erase
When you perform a DoD erase, the system completes a three-pass overwrite and
erases the entire contents and format of the USB ash drive. This type of erase process
can take longer to complete than the quick erase and full erase processes.
Warning! When you complete the following steps, all of the data on your USB ash
drive will be deleted. If your USB ash drive has data on it that you require, you should
create a backup le or use a dierent USB ash drive.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert USB ash drives into any of the USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight DoD Erase and press the OK button.
5. When the conrmation message appears, press the OK button.
Tip! To check the status of the erase process, use the UP and DOWN buttons to move
through the list of the USB ash drive ports.