Technical Specs
Instruction manual
15
Analyzing the quality of a USB ash drive
You can use the media check feature on the duplicator and eraser to check the quality
of a USB ash drive. You can also change the range and error limit of the Media Check
feature.
Perform a media check
There are three types of media checks that you can perform: H3 Safe, H5 RW, and H6
SafeRW. When you select the H3 Safe media check, the system reads the USB ash
drive to assess its quality. When you select the H5 RW or H6 SafeRW, the system reads
and writes to the USB ash drive to assess its quality.
Warning! When you complete the following steps, some or all of the data on your USB
ash drive might be deleted. If your USB ash drive has data on it that you require, you
should create a backup le or use a dierent USB ash drive.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert up to 15 USB ash drives into the Destination USB ash drive ports.
3. Highlight Utility and press the OK button.
4. Highlight Media Check and press the OK button.
5. Do one of the following:
• Highlight H3 Safe and press the OK button.
• Highlight H5 RW and press the OK button.
• Highlight H6 SafeRW and press the OK button.
When the process is complete, you can view the number of bad sectors detected and
the read/write speed of the USB ash drive on the LCD display.
Change the range limit percentage
You can select the percentage of the USB ash drive that you want to quality check.
1. Highlight Utility and press the OK button.
2. Highlight Media Check and press the OK button.
3. Highlight Setup Range % and press the OK button.
4. Highlight a percentage between 1 and 100 and press the OK button.