Technical Specs

Instruction manual
16
Change the MB range limit
1. Highlight Utility and press the OK button.
2. Highlight Media Check and press the OK button.
3. Highlight Setup Range MB and press the OK button.
4. Highlight a number between 1 and 9000MB and press the OK button.
Change the error limit
You can set the tolerance range when you check for errors on the USB ash drive.
1. Highlight Utility and press the OK button.
2. Highlight Media Check and press the OK button.
3. Highlight Set Error Limit and press the OK button.
4. Do one of the following:
• Highlight Sector and press the OK button.
• Highlight KB and press the OK button.
• Highlight MB and press the OK button.
• Highlight GB and press the OK button.
5. Highlight a number and press the OK button.
View information about a USB ash drive
You can use this feature to view information about a USB ash drive, including drive
type, content size, total capacity, and port number.
1. Use the Power switch to turn on the duplicator and eraser.
2. Insert up to 15 USB ash drives into the Destination USB ash drive ports.
3. Highlight Information and press the OK button.
4. Highlight USB Info. and press the OK button.
5. Use the UP and DOWN buttons to move through the USB ash drive ports.