Technical Specs

Instruction manual
3
Changing the device settings
In the Setup menu, you can change the settings of the duplicator and eraser, including
the button sound, display language, and so on.
Change the startup function
You can select the function that is displayed when you turn on the duplicator and
eraser. By default, the copy function is displayed when you turn on the device.
1. Highlight Setup and press the OK button.
2. Highlight Start-up Menu and press the OK button.
3. Highlight the function that you want displayed when you turn on the duplicator
and eraser, and press the OK button.
Turn o the audio feedback feature
By default, the audio feedback feature is enabled.
1. Highlight Setup and press the OK button.
2. Highlight Button Sound and press the OK button.
3. Highlight OFF and press the OK button.
Set up the duplicator and eraser
1. Connect the universal power adapter to the Power adapter port on the duplicator
and eraser and to a power source.
2. Use the Power switch to turn on the duplicator and eraser.
3. Press the UP and DOWN buttons to navigate the menu and highlight selections.
4. Press the OK button to make selections.
5. To exit a menu selection, press the ESC button.
For more information about the features and functions of the duplicator and eraser,
see the applicable sections of the manual.