Technical Specs
Instruction manual
4
Copying USB ash drive data
Each USB ash drive port on the duplicator and eraser has an independent control
processing unit and supports asynchronous and synchronous copying.
Change the copy area
You can set the duplicator and eraser to copy the system and les or all of the data on
the USB ash drives.
System and Files
If you select System and Files as the copy area, the system analyzes the le format of
the source USB ash drive and if the format is recognizable (for example, FAT16,
FAT32, NTFS, Linux ext. 2, and so on), the system will only copy the data and not the
entire USB ash drive. If the system doesn’t recognize the le format, it will copy the
entire storage capacity of the source USB ash drive, including any empty space. This
type of copy is also known as “quick copy.”
Whole Media
If you select Whole Media as the copy area, the system copies the entire source USB
ash drive, including les and empty space. This option is useful if you’re copying the
entire source USB ash drive or if you don’t know the format of the USB ash drive.
Copying the whole media area of a source USB ash drive takes longer to complete
than copying the system and les area.
By default, System and Files is set as the copy area.
Change the LCD display language
1. Highlight Setup and press the OK button.
2. Highlight Language and press the OK button.
3. Highlight English or Japanese and press the OK button.
Restore the default factory settings
1. Highlight Setup and press the OK button.
2. Highlight Set to Default and press the OK button.
3. When the conrmation message appears, press the OK button.