User Manual
Table Of Contents
Instruction manual
25
gure 16
Column
Cable
Cable cover
Route cables
1. Run your cable along the column and through the slot at the bottom of the column.
2. At the top of the cable cover, squeeze the tabs and gently pull the cable cover from
the monitor arm.
3. Slide the cable cover up to unhook the tabs at the bottom of the cable cover from
the slots in the monitor arm, and lift the cable cover o of the monitor arm.
Caution! Be careful not to snap o the tabs from the cable cover when you remove it.
4. Run the cable along the inside of the cable cover. (gure 16)
5. Hook the tabs at the bottom of the cable cover into the slots in the monitor arm,
and push the tabs at the top of the cable cover into the corresponding slots.
Tab
Slot
Slot
Tab