Wall-Mounted Sit-Stand Workstation | Single Monitor Mount | Keyboard Tray Actual product may vary from photos User Manual SKU#: WALLSTSI1 For the latest information and specifications visit www.startech.
Compliance Statements Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Warning Statements • Make sure that you assemble this product according to the instructions. • Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: 45.2 lb. (20.5 kg). • This product is intended for indoor use only and should not be used outdoors. Varningsmeddelanden • Se till att du monterar produkten i enlighet med instruktionerna. • Överskrid inte produktens viktkapacitet.
Mensagens de aviso • Certifique-se de que monta este produto de acordo com as instruções. • Não exceda a capacidade de peso deste produto. Sobrecarregar este produto pode resultar em ferimentos ou danos de propriedade. Este produto pode suportar o seguinte peso: 20.5 kg. • Este produto destina-se apenas a uma utilização no interior e não deve ser utilizado no exterior. • Este produto requer uma ligação à terra. Não utilize este produto sem uma ligação à terra.
Safety Statements Safety Measures • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Table of Contents Compliance Statements.........................................................................1 Warning Statements...............................................................................2 Safety Statements...................................................................................4 Product Diagram.....................................................................................6 Product Dimensions.............................................................................
Product Diagram 1 7 2 3 6 8 9 4 5 1 Monitor Mount 6 Swivel Arm 2 Spring Arm 7 Keyboard Tray 3 Wall-Mount Bracket 8 Mouse Pad 4 Aluminum Pole 9 Mouse Holder 5 Cable-Management Clip To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Dimensions To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Rotation To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Specifications Type of measurement Measurement VESA mounting hole pattern 75x75 100x100 Tilt +900 to -150 Screen size Maximum 762 mm (30 in.) Rotate 3600 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Swivel +1200 to -1200 Package Contents • • • • • • • • • • • • • • • • • • Aluminum Pole x 1 Wall-Mount Bracket x 1 Wall-Mount Bracket w/ Lock Plate x 1 Spring Arm x 1 Swivel Arm w/ Logo x 1 Swivel Arms x 2 Monitor Mount x 1 Wall Screws x 4 Wall Screw Anchors x 4 Hand Screws x 4 Keyboard Tray x 1 Cable-Management Clips x 3 Wrist Rest x 1 Mouse Holder x 1 Mouse Tray x 1 Mouse Tray Fixed Plate x 1 Hook-and-Loop Strip x 1 Anti-Slip Rubber Strips x 2 To view manuals, videos, drivers, downloads, technical dr
• • • • • M3 Hex Key x 1 M6 Hex Key x 1 M4x8 mm Screws x 2 EVA Mouse Pad x 1 User Manual x 1 Requirements • • • • Phillips Head Screwdriver x 1 Drill with Drill Bit x 1 Writing Utensil x 1 Level x 1 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installation Mounting the Sit-Stand Workstation Notes: Make sure when mounting the Sit-Stand Workstation that you mount the bottom Wall-Mount Bracket w/ Lock Plate first and slide the Aluminum Pole into the Wall-Mount Bracket w/ Lock Plate before mounting the top Wall-Mount Bracket. Product mounting should be completed by a certified professional as per the local safety and building code guidelines.
6. Slide the Aluminum Pole into the bottom Wall-Mount Bracket, making sure that you align the notch in the Aluminum Pole with the notch in the Bottom Lock Plate. Slide the Aluminum Pole into the Bottom Lock Plate 7. Secure the Aluminum Pole in place by tightening the Adjustment Knob on the Wall-Mount Bracket. 8. Slide one of the Cable-Management Clips onto the Aluminum Pole, sliding the Cable-Management Clip to the bottom of the Aluminum Pole. 9.
10. Once the Cable-Management Clip is at the right tension, snap the Adjustment Clip closed to secure the CableManagement Clip to the Aluminum Pole. 11. Slide one of the Swivel Arms onto the bottom of the Aluminum Pole, so that it is resting on the CableManagement Clip. Installing the Swivel Arm 12. Tighten the Swivel Arm using the Adjustment Screw located on the side of the Swivel Arm. Be careful not to over-tighten the Swivel Arm. The Swivel Arm should be secure but free enough to rotate. 13.
Installing the Second Swivel Arm/Cable-Management Clip 14. If required, the third Cable Management Clip can be installed on the Aluminum Pole. 15. Slide the top Wall-Mount Bracket over the Aluminum Pole. 16. Using two of the Wall Screws, mount the top Wall-Mount Bracket on the mounting surface. 17. Secure the Aluminum Pole in place by tightening the Adjustment Knob on the Wall-Mount Bracket. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installing the Top Wall-Mount Bracket 18. Once you have mounted the Sit-Stand Workstation, insert the decorative cover into the bottom of the Aluminum Pole. Make sure to align the notch on the Decorative Cover with the Bottom Lock Plate. Inserting the Decorative Cover To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attaching the Mouse Pad 1. Determine which side of the Keyboard Tray you want to position the Mouse Tray. 2. Align the Mouse Tray with the two metal prongs on either side of the Keyboard Tray. Aligning the Mouse Tray with the Metal Prongs 3. While holding the Mouse Tray in place, turn the Keyboard Tray over. 4. Align the screw holes on the Mouse Tray Fixed Plate with the screw holes on the bottom of the Mouse Tray.
5. Insert the M4x8 mm Screws through the Mouse Tray Fixed Plate and into the Mouse Tray. 6. Using a Phillips Head Screwdriver tighten the Mouse Tray Fixed Plate Screws, be careful not to over-tighten the screws. 7. (Optional) You can attach the EVA Mouse Pad onto the Mouse Tray, by removing the backing from the EVA Mouse Pad and affixing it to the surface of the Mouse Tray. 8. (Optional) You can hang the Mouse Holder off of the side of the Mouse Tray.
Attaching the Hook-and-Loop Strip The Hook-and-Loop Strip is designed to help hold the Keyboard in place on the Keyboard Tray. 1. If necessary, cut the Hook-and-Loop Strip to fit the length of your keyboard. 2. Separate the two sides of the Hook-and-Loop Strip. 3. Remove the backing from both of the Hook-and-Loop Strips and while applying pressure, fix one strip to the top of the Keyboard Tray and the other strip on the bottom of the Keyboard, making sure to align the two strips.
2. Slide the Mounting Hole on the Swivel Arm over the Mounting Peg until it clicks in place. Attaching the Swivel Arm to the Mounting Peg 3. Using the Hex Key (included), tighten the Hex Screw on the side of the Swivel Arm. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
4. Align the Mounting Hole on the Keyboard Tray with the Mounting Peg on the Swivel Arm that was attached in step 2. Slide the Mounting Hole on the Keyboard Tray over the Mounting Peg until it clicks in place. Attaching the Keyboard Tray 5. Using the Hex Key, tighten the Hex Screw on the side of the Keyboard Tray next to the mounting hole. Do not overtighten, to allow for keyboard swivel. Note: The Keyboard Tray supports up to a maximum 2.5 kg.
Attaching a Monitor 1. Align the Mounting Holes (x 4) on the Monitor Mount with the mounting holes on the back of the Monitor. 2. Insert the Hand Screws through the Monitor Mount and into the back of the Monitor. 3. Using your fingers, tighten the Hand Screws. Warning! Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in damage to the monitor.
2. Slide the Mounting Hole on the Spring Arm over the Mounting Peg until it clicks into place. Attaching the Spring Arm To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
3. While supporting the weight of the Monitor, carefully align the Mounting Hole on the Monitor Mount with the Mounting Peg on the top Spring Arm. 4. Slide the Mounting Hole on the Monitor Mount over the Mounting Peg until it clicks into place. Attaching the Monitor Mount 5. Using the Hex Keys, adjust the swivel tension of the Monitor Mount by loosening or tightening the Hex Screws located on the Monitor Mount next to the Mount Hole.
Adjusting the Monitor Tilt • While supporting the weight of the Monitor, use the Hex Key (included) to loosen or tighten the Hex Screw on the side of the Monitor Mount, until the tension can hold the weight of the Monitor but it is still adjustable. Note: The screw cap located on the opposite side of the Hex Screw is not used for tilt adjustments.
• Adjust the tension of the Spring Arm until the Spring Arm is capable of holding the weight of the attached Monitor at the desired height. Adjusting the Spring Arm Tension To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Adjusting the Keyboard Tilt • While supporting the weight of the Monitor, use the Hex Key (included) to loosen or tighten the Hex Screw on the side of the Monitor Mount, until the tension can hold the weight of the Keyboard but it is still adjustable. Adjusting the Keyboard Tray Tilt Note: The screw cap located on the opposite side of the Hex Screw is not used for tilt adjustments. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
