User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Wall Mount Workstation, Articulating Standing Desk w/ Ergonomic Height Adjustable Monitor Arm & Padded Keyboard Tray, 34" VESA Display, Foldable Wall Mounted Sit Stand Desk Foldable Standing Desk - mounting kit - for LCD display / keyboard /
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions
- Product Rotation
- Product Information
- Specifications
- Package Contents
- Requirements
- Installation
- Mounting the Sit-Stand Workstation
- Attaching the Mouse Pad
- Attaching the Wrist Rest
- Attaching the Hook-and-Loop Strip
- Attaching the Keyboard Tray
- Attaching a Monitor
- Attaching the Monitor Mount
- Adjusting the Monitor Tilt
- Adjusting the Spring Arm Tension
- Adjusting the Keyboard Tilt
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Mounting the Sit-Stand Workstation
Notes: Make sure when mounting the Sit-Stand Worksta-
tion that you mount the bottom Wall-Mount Bracket
w/ Lock Plate rst and slide the Aluminum Pole into the
Wall-Mount Bracket w/ Lock Plate before mounting the
top Wall-Mount Bracket.
Product mounting should be completed by a certied profes-
sional as per the local safety and building code guidelines.
Wall structures vary, and it’s important to make sure that the
type of structure and mounting hardware that you’re using
will properly support the mounted equipment. Failure to do
so may result in personal injury and/or equipment damage.
1. Before installing the Sit-Stand Workstation onto the
mounting surface, contact a professional contractor.
2. After consulting a professional, the Sit-Stand Workstation
can be mounted using the Mounting Hardware included.
3. Using two of the Wall Screws, mount the bottom Wall-
Mount Bracket on the mounting surface.
4. (Optional) While mounting, use Wall Screw Anchors if
required.
5. Remove the Decorative Cover from the bottom of the
Aluminum Pole. The Decorative Cover will be located on
the end of the Aluminum Pole that has the notch.