Operation Manual

| TURBO TRAINER Manufactured by STAR TRAC OWNER’S MANUAL

7. Hover the console (Fig. 8) over the neck mast and connect

the cable coming out of the mast into the cable protruding

from the console.

Fig. 7

8. Mount the console (Fig. 9) to the frame using the four pre-

installed Phillips head screws thru each of the available

holes on the neck plate.

Fig. 8

9. Mount the left & right grip arms (Fig. 10) onto the

corresponding pivot shafts located on the base of the

machine while mating the end of the grip arms to each of

the crank linkages and keeping the arms together by

loosely inserting a socket head cap screw with washer to

each joint.

Hardware

QTY

M8 x 20mm Socket Head Cap Screw

M8 x 25mm O.D. Flat Washer

Fig. 9