Operation Manual

| TURBO TRAINER Manufactured by STAR TRAC OWNER’S MANUAL

19. Insert the assembled seat post (Fig. 20) into the frame by

pulling on the pull pin located on the upright column of

the frame and sliding the post downward along with the

plastic sleeve verifying to lock the post into one of the

available positions.

Fig. 19

20. Mate the edge of the plastic sleeve flush with the edge of

the upright tube (Fig. 21) and install the corresponding

hardware to lock the plastic sleeve in place.

Hardware

QTY

M4 x 10mm Phillips Pan Head Thread Form

Screw

Fig. 20

21. Review all areas of the machine to verify no hardware

was left loose and install the leveling feet. Adjust each

leveling foot (Fig. 21) if needed to compensate for

uneven ground.

Fig. 21