Operation Manual

2. Locate the bottom bracket and align with
the holes in the rear support foot.
BENCH ASSEMBLY:
1. Place the Multi-Adjustable Bench upside
down and install the rear support foot as
shown. Note: The wheels need to face
outward.
Bottom
Bracket
Support
foot
3. Using four (M8,75mm,Socket Head Bolts)
eight (M8,Flat Washer) and four
(M8,Nylock,nuts) install as shown.
4. Using an M6 hex key and 13mm wrench
tighten the four M8 bolts using a criss-cross
sequence.
Page 8
MACHINE CLEARANCE AND SPACING
For the safe operation Star Trac recommends that a clearance of 48 inches (122cm) be maintained
between and behind equipment.
Before using this product, it is essential to read the ENTIRE operations manual and ALL
installation Instructions. The Owner’s manual describes equipment setup and instructs
members on how to use it correctly and safely.
Health related injuries may result from incorrect or excessive use of exercise
equipment. Star Trac strongly recommends you to encourage you and your members to
discuss their health program or fitness regimen with a health care professional,
especially if you or they have not exercised for several years, are over 35, or have
known health conditions.
WARNING!