Operating Instructions and Installation Instructions

MAINTENANCE AND SERVICE

LEVERAGE requires very little upkeep to keep your equipment performing at its best, the following

guidelines are suggested.

GENERAL CLEANING

 Wipe LEVERAGE with a light all-purpose cleaner, such as diluted Simple Green at a

30:1 solution.

 Dry LEVERAGE with a soft cloth to prevent rust.

BEARING GREASE PACKING

 Before bearings 731-0842 and 731-2595 installed they must be fully

packed with general purpose Lithium Grade 2 grease.

Pack with grease

TIGHTENING OF THE TAPERED ROLLER BEARING ON ALL SHAFTS

To properly torque the tapper roller bearing:



With the tab washer NOT installed torque the bearing nut to 40

42 Lbs

Ft.(This will

Page 8



With the tab washer NOT installed torque the bearing nut to 40

42 Lbs

Ft.(This will

square and seat the bearings)

 Back the nut off, then install the tab washer.

 Torque the nut to 7- 9 Lbs-Ft, now bend tabs on washers to lock in place.