OWNER’S MANUAL EA-AMP-SUB-1D-500 >> SUBWOOFER AMPLIFIER
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture. 1. Read and keep these instructions for future reference. 2. Do not use this apparatus near water. 3. Clean only with a dry cloth. 4. Do not block any ventilation openings. Install according to manufacturer’s instructions. 5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 6.
WELCOME TO EPISODE Episode® is one of the most highly regarded brands in audio available today. We stand committed to providing our customers with the highest degree of quality and service in the industry. The Episode® EA-AMP-SUB-1D-500 Subwoofer Amplifier is a superb choice for a variety of subwoofer applications and is designed to work with almost every type of home theater or audio system.
1 2 3 4 REAR PANEL FEATURES 1. AUDIO INPUTS a. Connect to Unbalanced Female RCA Inputs. b. Connect to the Right Female RCA input from a LFE output connection on a receiver or pre-amp processor. NOTE: If not using an LFE connection, both inputs have been calibrated to the same sensitivity level and should be connected. When connecting to a stereo pre-amp connection, use a Y-Adapter when connecting 2. SETUP MODES a. BOUNDARY EQ – Select the appropriate setting based on these guidelines below.
6 4. CONTROL INPUT a. Use this 1/8˝ Mono mini-jack to connect to most IR emitter output connections. The signal will be transferred and flashed to the IR receiver internally behind the front panel. This will eliminate the need to add “stick-on” emitters in most systems. NOTE: Due to variations in IR system types, not all are compatible with this control jack. In some cases, an emitter will be needed to place over the front panel IR window. 5. SPEAKER OUTPUTS a.
INSTALLATION – FIRST STEPS POSITIONING YOUR EPISODE AMPLIFIER Episode amplifiers are designed to help deliver a great audio experience that makes your music come alive for years to come. However, where you place the amplifier can have a large effect on the performance that you receive and the life of the unit. If you are not rack-mounting the amplifier, position it with all feet resting on a solid level surface. Be sure that the amplifier is in a well-ventilated area that provides adequate cooling.
REMOTE CONTROL The remote control has the following functions: 1. POWER - Toggles between Standby Mode and ON. 2. VOL+/- – Adjusts the volume. 3. MUTE – Mutes the subwoofer. Press again to unmute. 4. MUSIC/MOVIE – Selects the corresponding EQ mode. OPERATION The EA-AMP-SUB-1D-500 can be controlled manually from the front panel or via the supplied hand-held remote. A remote IR input can also be used for systems hidden behind closed cabinet doors or in an equipment rack located in other areas of the home.
SPECIFICATIONS Continuous Power Output 312 watts RMS at 8 ohms 500 watts RMS at 4 ohms Input Sensitivity 200 mv for full output, 500 watts, with level control set to max. Frequency Response 18 - 160 Hz Distortion .04% THD+N 1W/2W 100 Hz Auto On Sensitivity 3 mv External Trigger Voltage 5 V - 20 V EQ Modes Music: Flat Movie: +8dB@40Hz (30-80Hz) Boundary EQ ON = Flat OFF = +3dB Dimensions 17˝ W (18.9˝ including rack mounts) 1.7˝ H (1.9˝ including feet) 10.4˝ D (11.
