OWNER’S MANUAL ES-SUB-TRP8-300-BLK Triple 8 and 10 in.
ES-SUB-TRP Installation and Users Manual IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture. 1. Read and keep these instructions for future reference. 2. Do not use this apparatus near water. 3. Clean only with a dry cloth. 4. Do not block any ventilation openings. Install according to manufacturer’s instructions. 5.
ES-SUB-TRP Installation and Users Manual WELCOME TO EPISODE® Episode® is one of the most highly-regarded brands of speakers available today. We appreciate your business and we stand committed to providing our customers with the highest degree of quality and service in the industry. Episode® subwoofers are a superb choice for bass reinforcement of almost every type of audio system.
ES-SUB-TRP Installation and Users Manual INSTALLATION Right Left b Su PLACING YOUR EPISODE® SUBWOOFER Subwoofer placement can have an effect on the performance that you receive. All rooms are different, but the strongest output will likely occur if the subwoofer is placed in a corner of the room on the same wall as the front channel speakers. This is known as the boundary effect and will emphasize certain bass frequencies while canceling others.
ES-SUB-TRP Installation and Users Manual SUBWOOFER CONTROLS Your Episode® Subwoofer is suited to match nearly every home theater or music application: ES-SUB-TRP8-300 ES-SUB-TRP8-300 LOW LEVEL 1. VOLUME: Controls the overall output level of the subwoofer. 2. CROSSOVER: Sets the low-pass crossover frequency from 40 Hz to 200Hz (LFE). 3. PHASE: Selects the subwoofer’s phaseES-SUB-TRP8-300 response from 0 to 180°. (See FINE TUNING on pg. 9) 1 VOLUME MAX MIN 120Hz OUT 80Hz 160Hz CROSSOVER 40Hz 5.
ES-SUB-TRP Installation and Users Manual GETTING CONNECTED Episode® Powered Subwoofers are among the most flexible on the market today and can be configured for use in many different applications, as shown in the figures below. • For line level connections, use high-quality RCA cables that feature low impedance, shielding and high-quality connectors.
IN VOLUME LFE MIN 120Hz MAX ES-SUB-TRP Installation and Users Manual OUT 80Hz ES-SUB-TRP8-300 160Hz LEFT CROSSOVER HIGH-LEVEL INPUTS 40Hz RIGHT BALANCED LFE IN PHASE 0 ES-SUB-TRP8-300 180 ALWAYS ON SIGNAL SENSE TRIGGER POWER TRIGGER MODE AV Receiver/Processor OUT ES-SUB-TRP8-300 HIGH LEVEL OUT HIGH LEVEL IN RIGHT Switched Outlet RIGHT RIGHT +12V Trigger Out LEFT AUDIO SENSE - + LEFT CAUTION: 60Hz 5A 50/60Hz 5A T5A L 250V MIN 120V 220 - 240V ES-SUB-TRP10-500 ATTENT
1 Color: PANTONE COOL GRAY 6M Indigo P/N: SLK2938 Rev. E ES-SUB-TRP Installation and Users Manual 12V DC TRIGGER The TRP8 and TRP10 are equipped with a 12V trigger input to turn the amplifier off, reducing power consumption when not in use. When LOW LEVEL this input receives a 12V signal, the amplifier will turn ON; when the signal goes away, the amplifier will turn OFF.
ES-SUB-TRP Installation and Users Manual FINE TUNING After making all the connections and calibrating the sub, set up your Episode® subwoofer using the following steps: Note: When using an AV receiver and the LFE input, set the subwoofer calibration level to the factory setting before performing the following procedure. After making the below adjustments, calibrate the system via the AV receiver’s setup procedure. 1. Ensure that the subwoofer is plugged in. 2.
SPECIFICATIONS ES-SUB-TRP8-300 ES-SUB-TRP10-500 Driver (1) 8” Woven Fiberglass (2) 8” Passive Radiators (1) 10” Woven Fiberglass (2) 10” Passive Radiators Amplifier 300 watts RMS @ 0.2% THD 500 watts RMS @ 0.2% THD Signal to Noise Ratio 90 dB A-weighted 90 dB A-weighted Input Power 100-120V/220-240V, ~50/60Hz, 3.15A 100-120V/220-240V, ~50/60Hz, 5A Frequency Response 30 Hz to 200 Hz 30 Hz to 180 Hz Dimensions (H) 11.81 in. (300 mm) x (W) 12.8 in. (325 mm) x (D)12.8 in. (325 mm) (H) 13.
