Manual
SM-CEILING-CA
Strong™ Cathedral Ceiling Adapter for Ceiling Mounts
with 1-1/2 in. NPT Threading (Black)
PARTS INCLUDED
(1) Cathedral Adapter Assembly
(3) #14 x 2.5” Lag Screws
(4) M5 x 5mm Set Screws
(2) Allen keys
INSTALLATION
Step 1: Use Ceiling Plate to mark holes in ceiling.
Step 2: Pre-drill 3 holes using 3/16” drill bit. Insert 3 Lag
Screws into holes through Ceiling Plate and
tighten down.
Step 3: Thread extension pipe and tighten set screws
TOOLS REQUIRED
Power Drill
3/16” Drill Bit
Stud Finder
Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found
to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have
been abused, modied or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated
service center with prior notication and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052