Manual

100
WPS-100-DVR-8CH Installation and Users Manual
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
 •SERVERURL
Enter the FTP server web/IP address.
 •FTPPORT
Enter the FTP port number. The default value is 21.
 •USERNAME
Enter the username for the FTP server.
 •PASSWORD
Enter the password for the FTP server.
 •PREFIXOFFILENAME
  EntertheprexofthelenamesforlessenttotheFTPserver.Ifthisboxisleftempty,thelenameswill
  startwith“cam”Ifaprexsuchas“Prex”isentered,thelenameswillbe“Prex-cam”Foranother 
  example,iftheprexis“DVR01”,thenthelenameswillbeginwith“DVR01-cam.”
9.3.14 HDD
Alarm-triggered video and audio is typically more important than non-even normal video and audio recording
in surveillance applications. The DVR is designed to allow the hard drive to be partitioned into an alarm partition
and a normal partition. Partitions can only be set from the VGA or BNC main display (See Section 6.6). Alarm
video and audio will be recorded in alarm partition and normal video and audio will be recorded in the normal
partition.
HDD Setup
inInternetExplorerallowstheadministratortodenethebehaviorforAlarmRecordandNormal
Record partitions if the hard drive becomes full.
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
 •HDDFULLACTION
Based on the hard drive status, the DVR can sound the buzzer, log the event and email an alert when the
hard drives reaches its maximum capacity.