Manual

11
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
10. ENTER Button ( )
Thisbuttonisusedasan“enter”keyinmostcircumstances.WhenusingPTZcontrol,thisbuttonis
used to start/stop the selected PTZ control mode.
11. Numeric Buttons (1-8 on the front panel and 1-9, 0,
*
, # on the remote control)
Used for camera selection in most cases, these buttons can also be used to enter text and
numbers in a way similar to most mobile phones.
12. Left/RightButtons(◄►)
Press either button to move the focus window or cursor. When using PTZ control, press either
of these buttons to pan the camera. In playback mode, press either button for fast forward/reverse.
14. DownButton(▼/DELontheremotecontrol)
Press these buttons to move the focus window or cursor. When using PTZ control, press this button
totiltthecameradown.Intexteditingmode,thisbuttonisusedas“delete”key.
15. PAGE Button
When viewing the four camera split window, pressing this button toggles to the next split window
display page
16. COPY Button ( on the remote control)
Press this button during playback to display the SEARCH menu to copy recorded video to the
storage device connected to the USB port.
17. STOP Button ( on the remote control)
Press this button to STOP recorded video playback and return to LIVE view.
18. PLAY/PAUSEButton(►/IIontheremotecontrol)
Press this button to display the INSTANT PLAYBACK menu, and then PLAY or PAUSE recorded video.
19. REC Button
Pressing this button begins manual recording. To stop manual recording, press this button again.
Status is indicated in the status bar at the bottom of the main display.
20. Remote IR Sensor
Used to receive signal from IR remote controller.
21. USB Mouse Connector
Connect to the included USB1.1 mouse.
5 6 7 8 9 10 11
121314151617