Manual
21
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
The Status display includes:
•ALARMRECORDINGSTATUS
Displayed is the portion of the hard drive allocated to recording alarm events and the percentage of that
space that is currently full.
•NORMALRECORDINGSTATUS
Displayed is the portion of the hard drive allocated to regular (normal, non-event) recording and the
percentage of that space that is currently full.
•CAMERASTATUS
Motion and Video Loss is indicated by a white box for cameras 1-8.
•ALARMINPUTSTATUS
Alarm input status is indicated by a white box for alarm inputs 1-4.
•SERIALNUMBER
DVR serial number
•VERSIONNUMBER
Hardware and Software version numbers
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and return to
the main Menu display. Alternatively use the mouse to exit the sub menu by clicking on the “X.”Another
methodtoescapeistousethemouseto“right-click,”andexitthesubmenu.
5.2 VOLUME CONTROL
The Volume Control menu allows for the adjustment
of the gain (volume) for the AUDIO IN jacks. The
master audio out volume can be controlled
from the CONTROL BAR.
Once in the main Menu
display,press▲▼◄►on
the front panel of the DVRor remote control to select
Volume, and then press ENTER to display the menu
as shown. Alternatively use the mouse to click on
the Volume icon.
Note: This DVR supports two audio input channels.
Therefore options for Audio 3 and 4 will be displayed
in white text and cannot be changed.
Thefollowingisabriefdescriptionforeachiteminthesubmenuanditsspecicoperations:
•▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an option. Alternatively use
the mouse to select an option.
•ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main Menu display. Alternatively use the mouse to exit the sub menu by clicking on the “X.”
Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed requesting the user
to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save, ESC
toexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click,”andexitthesub
menu.