Manual

WPS-100-DVR-8CH Installation and Users Manual

 •CALL

Press this button on the front panel of the DVR or remote control to reset the video settings for all cameras

to factory default values.

 •MODE

Press this button on the front panel of the DVR or remote control to restore the values.

 •ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu

and return to the main Menu display. Alternatively use the mouse to exit the sub menu by clicking

on the “X.”Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed

requesting the user to save the changes. Press ENTER on the front panel of the DVR or remote control

to exit and save, ESCtoexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click,”

and exit the sub menu.

5.4 DISPLAY

The VGA Display menus allows for adjustment to the VGA output of the DVR.

Once in the Main Menu

display,press▲▼◄►onthefrontpaneloftheDVRorremotecontroltoselectVGA

Display and then press ENTER to display the menu as shown. Alternatively use the mouse to click on the VGA

Display icon.

Use the operations listed below to adjust Resolution, Brightness, Contrast, Hue, and Saturation.

Warning – Be sure the connected VGA monitor can accept the desired resolution before selecting it. If a

resolution is selected that is not supported by the monitor and video is lost at the VGA monitor, continue to

use the +/- buttons on the front panel of the DVR or the remote control to select a setting that is supported. An-

other option would be to temporarily connect a composite video monitor to the Video Out BNC to

properly set the VGA resolution.

 •▲▼◄►

Press these buttons on the front panel of the DVR or remote control to select an item. Alternatively

use the mouse to select an item.

 •+/-

Press these buttons on the front panel of the DVR or remote control to change the settings. Alternatively

use the mouse to make these changes.